CatEye MSC-HR10/MSC-HR20 - Manual (Page 3)

5 4
2.1
2.2
2.0
(2 SEC.)
All Reset
Press 4 main buttons for 2 seconds to reset the MSC-HR10/20.
When malfunctions occur, do All Reset and repeat Profile edits.
BASIC OPERATION
FIRST TIME OPERATION
Press any key for 2 seconds to activate the LCD display.
Navigation
Each button operates either by pressing once, or by holding for 2 seconds.
Basic Operation
You can navigate through each of the four main modes by pressing the MODE button.
Without any programming you can attach the Heart Rate Sensor, press the MODE button until you
are in the Stopwatch Mode and begin using the MSC-HR10/20 with simple timer and heart rate
functions.
CLOCK STOPWATCH COUNTDOWN PROGRAM
USER/EXERCISE
PROFILE
CHANGING SETTINGS
• From Clock mode press and hold the SET button for two seconds.
• The hours are now flashing. Use the ST/SP/+ or MEM/- buttons to adjust and
press the SET button to continue.
• The minutes are now flashing. Adjust and press the SET button.
• The year data is now flashing. Adjust and press the SET button.
• The month is now flashing. Adjust and press the SET button.
• The day is now flashing. Adjust and press the SET button.
• The 12-hour/24-hour clock setting is now flashing. Adjust and press the SET
button.
• The day/month display order is now flashing. Adjust and press the SET button.
• The clock is now set.
NOTE:
The MSC-HR10/20 returns to Clock Mode if left
idle for 30 seconds, or if the MODE button is
pushed.
NOTE: The clock is programmed with a 50-year auto-calendar.
• When a digit is flashing that unit can be changed.
• Press the ST/SP/+ button to incre ase the digit.
• P ress the MEM/- button to decrease th e digit.
• Press and hold the ST/SP/+ or MEM/- button to increase or decrease the digits r apidly.
• Press the SET button to confirm it and advance to the next setting.
SETTING THE CLOCK