CatEye MSC-HR10/MSC-HR20 - Manual (Page 4)

7 6
2.3 2.4
RECORDING LAPS (HR20) STOPWATCH MODE
• Use the ST/SP/+ button to start and stop the timer function in the Stopwatch mode.
• Use the SET button to navigate between the different screens available in the Stopwatch mode.
The SET button navigates between the following screen with current heart rate in the lower portion of
the screen.
STOPWATCH % OF MAX HEART RATE AVERAGE HEART RATE
CALORIES BURNED/
% BURNED AS FAT CLOCK
NOTE:
The stopwatch begins measurement in
min:sec:1/100 sec. After 59 minutes pass,
the display will change to hrs:min:sec.
In Stopwatch mode you can press the MEM/LAP/- button to record a lap.
The screen will freeze on the current lap time and lap number for two seconds. You can save up to 44 laps.
After two seconds the screen returns to the Stopwatch mode.
• All lap data will be cleared after the Stopwatch has been reset and restarted.
• If the Stopwatch is stopped and there is no heart rate signal for 30 seconds, the watch returns to the
Clock mode.
• To reset the Stopwatch data, with the timer stopped, press and hold the SET button for two seconds.
MAX HEART RATE