EXONIC EXD 7088GPS1 - Manual (Page 10)

11
Select Radio as Playing Source
Open the SOURCE MENU and then touch [Radio].
Select One Radio Band
Press the [BAND] key on remote control or touch the [ ] icon on
the user interface to select one radio band among FM1, FM2, FM3,
AM1 and AM2.
Tune
Auto tuning
Press and hold the [ ] / [ ] key on the remote control or touch and hold [ ] / [ ] icon on
the user interface more than 1 second to seek a higher / lower station.
To stop searching, repeat the operation above or press other keys having radio functions.
Note:
When a station is received, searching stops and the station is played.
Manual tuning
During manual tuning, the frequency will be changed in steps.
Press the [ ] / [ ] key on the remote control briefly or touch [ ] / [ ] icon on the user
interface to tune in a higher / lower station.
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations;
hence the unit can store 30 stations in total.
Preview scan
Short- press the [ ] icon and auto scan among station when a station is received and the
played for 5 seconds.
Long- press the [ ] icon, only stations with sufficient signal strength will be detected and stored
in the memory.When you want to listen to the station, don’t need to search again, and only need to
press the number button.
Manual store
1. Tune to a station.
2. Touch [ ].
3. Touch one of the channels P1 to P6 to save the selected band.
Recall a preset station
1. Touch [Radio].
2. Select the desired band.
3. Touch one of the preset channels (P1 to P6) on the bottom of the screen.
Local Seeking
Touch the [ ] icon and choose the Radio Local or Distance.
When the [LOC] icon turns red, only stations with sufficient signal
strength will be detected.
EQ Selection
Press the [ ] icon and enter the EQ setup.
Radio mode