Playback – EXONIC EXD 7088GPS1 User Manual

Page 11

Advertising
background image

12

Insert a disc

Upon inserting a disc, the unit will switch to [DISC] mode automatically.

Notes:
 ①

Please confirm whether there is a disc in the unit before you insert another one.

 ②

S

ome recorded discs, such as CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW cannot

be played back because of different recording status. Otherwise, the discs without being

closed could not be played back.

 ③

About the cautions of disc using, please refer to the appendix.

 ④

Don’t pledge to compatible the all disc.

Eject the disc

Press the   key on the front panel or remote control to eject the disc.

When the disc is ejected,the unit switches to the previous source, if connected.

Otherwise, the unit switches to [Radio] mode automatically.

Touch screen controls

The touch key areas for DVD playback are outlined below:

A - Open SOURCE MENU

B - Display playback information

C - Display onscreen control menu

Connect USB Device

1. Open the USB door.

2. Insert the USB slot.

Remove the USB Device

1. Select other source on the main menu.

2. Remove the USB device.

Notice:

1. If there are audio files supported in the USB stick, the system will enter the audio files menu

automatically.

If there are no audio files, but there are video files supported in the USB stick, the system will

enter the video files menu automatically.

If there are no audio or video files, but there are picture files supported in the USB stick, the

system will enter the picture files menu automatically.

If there are no above audio/video/picture files supported in the USB stick, the screen will

display: There are no audio/video/picture files supported.

2. Not all kinds of USB devices are compatible with the unit.

Playback

Advertising