EXONIC EXD 7088GPS1 - Manual (Page 2)

3
Precautions
1. Never disassemble or adjust the unit without professional guidance.
For details, please consult any professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is soiled, please use a clean silicone
cloth and neutral detergent to wipe off the spot. Using a rough cloth
and non-neutral detergent such as alcohol for cleaning may result in
scratching or decoloration of the unit.
3. If the unit malfunctions, please refer to the troubleshooting guide of this
manual. If no relevant information is found,please press the [RESET]
key on the front panel to resume to factory default.
4. If you have parked the car in hot or cold weather for a long time, please
wait until the temperature in the car becomes normal before operating
the unit.
5. Using in-car heater in low temperature environment may result in water
droplets coagulating an inside the unit. DO NOT use the unit in this
situation, eject the disc and wipe off the droplets on the disc. If the unit
still does not work after a few hours, please contact an after-sales service
centre.
6. Do not apply force to the LCD monitor when it is in an open position in
order to prevent damage to the internal mechanisms
7. To prevent damaging the screen, avoid touching it with sharp objects.
8. The monitor has an automatic motorized mechanism. In order to prevent
damaging it , do not manually push, pull or swivel the monitor.
9. To provide a clear and easy understanding of the operation of this
unit, graphic illustrations areused. However, these illustrations may be
different from the actual images displayed on the screen.
10. While operating the unit, “ ” will display if the current operation is
not available or illegal.
11. Operate the unit correctly according to this manual to prevent
unnecessary problems. The guarantee will not be valid if the problem is
caused by inappropriate operation.