EXONIC EXD 7088GPS1 - Manual (Page 24)

25
Adjust Volume
To adjust volume, rotate the volume knob on the host car audio.
Mute
When playback, press the VOLUME knob on the panel or [ ] on the screen (if available),
the sound is cut off.
To resume sound, press the button again.
Select Preset Equalizer
You can select preset equalizer:
∙ [User] ∙ [Rock]
∙ [Flat] ∙ [Class]
∙ [Pop] ∙ [Jazz]
∙ [Techno] ∙ [Optimal]
1. Touch [ ] on the screen.
The current Equalizer setting is displayed.
2. Touch [ + ] or [ - ] to select an EQ.
3. Touch [ + ] or [ - ] to adjust below settings:
∙ [Bass] bass range: -7 to +7
∙ [Mid] middle range: -7 to +7
∙ [Treb] treble range: -7 to +7
∙ [LPH] low pass filter range: 60, 80, 100, 200
∙ [MPF] middle pass filter range: 0.5K, 1K, 1.5K, 2.5K
∙ [HPF] high pass filter rang: 10K, 12.5K, 15K, 17.5K
4. Touch [ ] to restore the above settings into default settings.
5. Touch the upper left corner of the screen to exit.
Adjust Fader/Balance
You can also adjust the front and rear speaker balance, the left and right speaker balance,and
subwoofer settings.
1. Touch [ ] on the screen.
2. Touch [ ].
Below options are displayed:
3. Touch [ + ] or [ - ] to select subwoofer volume.
∙ [Sub] subwoofer volume: 0 to 38.
4. Touch [ ], [ ] or [ ], [ ] to adjust fader/balance value.
∙ [Fade] fader range: -7 to +7 (F=front range, R=rear range)
∙ [Balance] balance range: -7 to +7 (L=left range, R=rear range)
5. Touch the upper left corner of the screen to exit.
Adjust sound