EXONIC EXD 7088GPS1 - Manual (Page 20)

21
Other modes
AUX
External peripheral devices with RCA audio and vedio outputs can be connected with the unit.
For more details, please refer to( Electrical Connections Overall Diagram) .
Open the ‘ SOURCE MENU’ ,and select ‘ AV_IN’ to enter AUX IN mode.
GPS
Navigation system is supported by the unit.
Open the “ SOURCE MENU”, and select “ GPS” mode to enter, and press [ SRC ] button on the
remote control to exit and switch to other mode.
For the GPS system is independent and complicated, for more details, please refer to
“Navigation manual” (Not included in this manual).
Wall paper
Press the icon to enter wall paper setup.
Cancel the wall paper set already.
After selecting the video image form
external device, press this icon to confirm
Display the route images stored
Previous station
Delete the route images stored
Scan the information of SD
Skip to the previous image stored in
external device
Skip to the next image stored in external device
Notice:
1. If you want to change the wall paper freely, please insert the SD card with wall paper
images stored.
2. The image format: BMP, 800X480 pixels.
compass
1. Touch [compass] on the main menu.
Shown as figure 1.
Touch
Shown as figure 2.