Power Soak 35351 Skewer Soak INstallation Manual - Manual (Page 16)

12
Overflow Drain
Place some cardboard or soft packing material on the floor to prevent
scratching the surface and set the sink over on to its front face in order to
see the top overflow drain hole.
The top overflow drain on the side wall of the Skewer wash tank will need
to have the drain installed and piping (not furnished by Power Soak Inc.)
connected to the drain. It is easier to install the plumbing from the drain to
a location below the motor before the sink is set upright.
Install the overflow
drain and piping