Power Soak 35351 Skewer Soak INstallation Manual - Manual (Page 7)

3
(ELECTRICAL REQUIREMENTS CONTINUED)
This machine will require a permanently mounted disconnect that is in a
“liquid tight” enclosure. Do not use an in-line plug for disconnecting the
machine from the electrical source. Contact a licensed and certified
electrician to make the enclosure installation if one is not present. Use the
tables in the appendix to determine the appropriate breaker (overcurrent
protection) and wire size for the machine’s electrical service.
WARNING: DO NOT connect the machine using a power cord and
plug or an extension cord of any kind.
WARNING: Kitchens are a wet environment which require all
electrical connections to be “liquid tight”.
Electrical installation must conform to all applicable local wiring codes.
All electrical connections must be “liquid tight” and readily accessible
for inspection after installation without moving the Power Soak
machine or any of its accessories.
IMPORTANT