Power Soak 34201 PRODUCE SOAK OWNER'S MANUAL User Manual
Page 32
30
Your system requires minimal, routine preventive maintenance. As such,
the following should be done on a routine basis to ensure that your system
remains reliable.
IMPORTANT: Turn off the power to the unit at the main
breaker prior to performing the following task!
About once per month, clean the pump motor fan shroud with a damp,
soapy rag. The motor shroud is the "vented" cover located at the end of the
motor (closest to the control panel). This will prevent grease and dust from
accumulating in the cover's openings, which can obstruct the airflow that
cools the motor.
About once per month, de-lime the wash sink. Simply add a de-liming
agent to a sink of warm, fresh water and run the system overnight.
Ask your chemical sales representative to recommend a specific de-liming
agent.
You need not be concerned about greasing the motor bearings, as they
are permanently sealed.
There are no other preventive maintenance procedures that you will need
to perform on your Produce Soak system. If you have any questions
regarding the preventive maintenance procedures, please contact the
factory at 800-444-9624.