TurboChef Technologies G5 - Manual (Page 33)

27
OV
eN
MOD
eS
- MANAG
er
Cook Compensation
The cook cavity temperature
can deviate from the set point
if there is inconsistency in
the amount of product being
cooked, or inconsistency with
the starting state of the product
(e.g., frozen or fresh). Cook
compensation can be used to
speed up or slow down the
increments of time during
a cook cycle. This helps to
offset the effect temperature
variations can have on cooking
results.
For each cook compensation
increment, the oven speeds up
(positive increments) or slows
down (negative increments) the
cook time by 10 ms.
1. Select “Tools.”
2. Select “Factory.”
3. Enter the passcode 9 4 2 8.
4. Select “Parameters.”
5. Select “Cook Compensation.”
6. Set the cook compensation.