TurboChef Technologies G5 - Manual (Page 35)

29
Tr
O
u
BL
eSHOOTING
Issue Possible Cause(s) resolution
F1: Blower Running
Status Bad
- Oven power interrupted. - Verify the wall circuit breaker is on.
Reset the breaker and then power the
oven on.
- Place the oven in the off state and
unplug the oven – leave for two
minutes. Re-plug in the oven, switch on
the isolator/main power supply, and
touch the “Power” icon.
F5, F11, F12:
Magnetron Over
Temperature
- Blockage of cool air into the
oven.
- Rear cooling fan exhaust
guard(s) clogged.
- Remove anything that may be obstruct-
ing the flow of cool air into the side/rear
oven panels.
- Make sure the rear fans are free of debris.