Transport control, E the – Akai Rhythm Wolf User Manual
Page 7
7
Transport Control
Rhythm Wolf's Play/Stop button operates differently depending on its
Sync
setting (
Step
Switch 13
).
When set to Internal:
•
Press the
Play/Stop
button to start or stop playback.
•
Press the
Velocity
and
Play/Stop
buttons at the same time to start playback from the
very beginning of the pattern rather than from the current position.
•
When Rhythm Wolf's
MIDI Out/Thru
is set to
Out
, it will send MIDI Start, Stop, Continue,
Clock, and SongPosPtr=0 depending on its transport state.
•
Rhythm Wolf's
Gate Trig Out
will pulse each time it advances one step.
When set to External or USB:
•
Rhythm Wolf's playback will respond to incoming MIDI Start, Stop, Continue, Clock, and
SongPosPtr=0 messages.
•
Rhythm Wolf's transport controls will not function.
When set to Gate:
•
Press the
Play/Stop
button to start/resume or stop playback.
•
Rhythm Wolf's time division can be set only to
1/8
or
1/16
:
o
When set to
1/8
, two pulses will advance playback by one step.
o
When set to
1/16
, one pulse will advance playback by one step.
•
Rhythm Wolf's
Gate Trig Out
will mimic its
Gate Trig In
.