American Electric Lighting AVL, ASA, VMR, VLR, PES & PEM - Manual (Page 5)

Installation:
Remove the top plate of the wiring compartment. Make wiring connections. Secure by slipping the fixture, internal wedge end first, into
the top of the pole. Start turning the cap nut allowing the internal wedge to expand the internal expansion collar. Keep tightening the cap
nut until the internal expansion collar has expanded enough to grip into the inside of the pole keeping the fixture securely in place. Re-
place the top plate of the wiring compartment.
Post-top Spider Mount:
PT4 For poles with 3.5” – 4.0” I.D.
A = 2.6”
B = 2.9”
C = 0.3”
Dimensions and specifications on this page are based on the most
current available data and are subject to change without notice.
Options are to be installed in the field. DO NOT alter fittings when mounting the fixtures. Recheck all connections and bolts to insure
they will not loosen due to vibration.
INSTALLATION INSTRUCTIONS
PES/PEM, VLR/VMR, ASA, AVL SERIES MOUNTING OPTIONS
(PT4 OPTION)
DRAWING NO. A72261 REV B (FRONT SHEET 3) PART NUMBER 057-71-72261
WARNING
!
American Electric Lighting, a division of Acuity Brands Lighting, Granville, OH
©2009 ACUITY BRANDS LIGHTING, INC. ALL RIGHTS RESERVED