Beijer Electronics EPC C2D Box Nautic EN - Manual (Page 23)

Operation
Beijer Electronics, MAEN979B 23
6.3 Important Items Regarding
Software Installation
The included driver CD includes all drivers needed for a successful reinstallation
of the EPC. Since the EPC is not equipped with a CD/DVD player, an external
USB CD/DVD player has to be used.
The drivers are also available on the “D:” drive.
When the CD is loaded, a menu is displayed for selection of driver installation,
displaying manuals etc. Follow the steps below in the specified order, when re-
installing the system:
1. Install the chipset driver.
2. Install the graphic drivers.
3. Install the touch screen drivers.
4. Install the network drivers.
Note:
To avoid always having to re-start the installation procedure of the operating sys-
tem, we recommend making an image of the new hard disk (using e.g. Norton Ghost,
Drive Image etc.). Then you can always fall back on the operational image, if need-
ed.
Note:
After operating the system for the first time we recommend that you make start
discs (emergency discs). These might be required to restore an operational system.
Additionally, we recommend making backup copies of your own data and applica-
tions.