Beijer Electronics EPC C2D Box Nautic EN - Manual (Page 36)

Service
36 Beijer Electronics, MAEN979B
7. To ensure an optimal use of the board holder, we recommend that you put
wide boards in the lower slot and narrow boards in the upper. This way the
support can be used in the correct way.
7.4 Cable Fixing Points
When connecting interface cables such as RS232, USB, LAN or VGA, the ca-
bles must be fixed at the cable fixing points, to avoid that the cables loosen be-
cause of vibrations.
Note:
If two wide boards are used, the short support (5) can be removed.
5