Beijer Electronics EPC C2D Box Nautic EN - Manual (Page 29)

Operation
Beijer Electronics, MAEN979B 29
6.6 Installation of LAN-/Network Card
After installing the operating system and the chipset driver, the system automat-
ically creates a link to a network connection. You will find a network icon on the
lower right-hand side of the task bar.
1. To install the second network card, follow the instructions on the driver
CD.
2. Confirm each installation step and re-start the EPC at the end of the instal-
lation.
3. After the re-start two new network icons appear in the right hand side lower
task bar.
4. You can now configure both network cards to your own requirements (IP-
address etc.) via the system control.
5. Via the MS-DOS window, under Start/All Programs/Accessories/
Command prompt, you can set a “connection PING” to test your connec-
tions to the server and other PC’s.
(for example: C:\ping 192.168.5.100).