Beijer Electronics EPC C2D Box Nautic EN - Manual (Page 31)

Service
Beijer Electronics, MAEN979B 31
7 Service
7.1 Introduction
Only spare parts recommended by Beijer Electronics may be used.
7.1.1 Tools
You can carry out the disassembly and assembly with an 2.5 mm Allen key and
a Phillips head screwdriver, size 3.
7.1.2 Preparation
Disconnect the EPC from the power supply.
7.1.3 Opening the EPC
All operations to the opened EPC may only be carried out by authorized per-
sonnel. Only the expansion of hardware with memory and plug-in-cards is per-
missible within the defects liability period.
Attention! Deadly Peril!
Make sure that your electrostatic pad does not damage the front panel
of the EPC.
Note:
Inside the EPC there are electronic components which can be destroyed by elec-
trostatic charges. Therefore cautionary measures have to be taken from the mo-
ment the EPC is opened. These can be found in the guidelines for electrostatic
endangered components (EGB-guidelines).