Beijer Electronics iX Panel K70 EN - Manual (Page 20)

Additional Hardware
5. Re-attach the back cover to the operator panel.
6. Turn on the power to the operator panel.
When the operator panel starts up, you will be asked if you like to move the
files to the internal card; select YES to this question.
7.1.2 Settings in iX Developer
The size of the internal memory card must be entered in iX Developer.
1. Click on Settings on the Project group of the Project ribbon tab.
2. Select the Display/Panel properties.
The size of the internal memory card is stated under Memory Card.
Beijer Electronics, MAEN002 20