Beijer Electronics iX Panel TA150 EN - Manual (Page 10)

Technical Data
3 Technical Data
Parameter iX Panel TA150
Front panel, W x H x D 398 x 304 x 6 mm
Mounting depth 60 mm (160 mm including clearance)
Front panel seal IP 66
Rear panel seal IP 20
Keyboard
material/Front
panel Touch screen: Polyester on glass, 1 million finger touch
operations. Overlay: Autotex F157 or F207*.
Reverse side
material Powder-coated aluminum
Weight 3.7 kg
Serial port
RS422/RS485 25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC
Serial port RS232C 9-pin D-sub contact, male with standard locking screws 4-40
UNC
Ethernet 2 x shielded RJ 45
USB Host type A (USB 2.0), max output current 500 mA
Memory slots 1 x SD card
Real time clock ±30 PPM + error because of ambient temperature. Total
maximum error: 77 seconds/month at 25 °C.
Temperature coefficient: -0.034±0.006 ppm/°C
2
Rechargeable battery.
Power consumption
at rated voltage Normal: 1.2 A
Maximum: 1.7 A
Display TFT-LCD.1024 x 768 pixels, 64K colors.
CCFL backlight lifetime at the ambient temperature of
+25 °C: >35,000 h.
Active area of
display, W x H 304.1 x 228.1 mm
Fuse Internal DC fuse, 3.15 AT, 5 x 20 mm
Power supply +24 V DC (20 - 30 V DC). Power supply connector.
CE: The power supply must conform with the requirements
according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the
requirements for class II power supplies.
Ambient
temperature Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
Storage temperature -20 ° to +70 °C
Relative humidity 5 - 85 % non-condensed
Approvals and
certifications Information is available on the web site
www.beijerelectronics.com
* See section Chemical Resistance for more information.
Beijer Electronics, MAEN011A 10