1 mode switches, 2 connections to the controller, 3 other connections and peripherals – Beijer Electronics iX Panel TA150 EN User Manual
Page 9: Mode switches, Connections to the controller, Other connections and peripherals, Mode, Installation
Advertising
Installation
2.2.1
Mode Switches
All mode switches must be in OFF position during operator panel use.
The mode switches should not be touched unless by qualified personnel.
1
24V DC
CF CARD
COM 1
RS422
RS485
COM 2
RS232
10/100
EXP
ANSION
BUSY
MODE
1 2 3 4
ON DIP
MODE
1 2 3 4
ON DIP
2.2.2
Connections to the Controller
For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.
2.2.3
Other Connections and Peripherals
Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Beijer Electronics, MAEN011A
9
Advertising