Fagor FQ8965X - Manual (Page 10)

10
Freezer pans
Pull the drawer out to the stop
position, rotate all four swing
locks to the unlock position
and lift the front of the pan up
and out�
To replace make sure all four
swing locks are in the unlock
position, place the sides of
the drawer into the drawer
supports, making sure the
swing locks fit on the drawer
slots and lock all four swing
locks by rotating them to the
lock position�
ABOUT THE PANS, SHELVES AND
BINS ARRANGEMENT
Accessories inside this unit,
pans, shelves and bins, have a
fixed position in refrigerator and
freezer compartments except the
slide-out shelves and module
bins, these can be assembled
on different levels� For a better
temperature distribution and
use of energy, it is recommended
that slide-out shelves as well as
module bins to be assembled
such that the separation between them be proportional, see
figure for reference�
Note: For an adequate performance,
do not block the temperature sensor
grills inside the refrigerator and freezer
compartment.
MAXIMUM STORAGE
CAPACITY
Refrigerator
slide-out shelf
20 Kg
Module
bin
7 Kg
Fixed
bin
4 Kg
Refrigerator
upper pan
20 Kg
Refrigerator
bottom pan
8 Kg
Big freezer
shelf
16 Kg
Small freezer
shelf
8 Kg
Freezer
shelf
3 Kg
Freezer
upper pan
9 Kg
Freezer
bottom pan
3 Kg
ESTIMATED SHELF STORAGE
AREA
Capacity Storage Area
dm 2
22’ 176
Note: Values can change according to the model.