Installations instructions – Fagor FQ8965X User Manual

Page 14

Advertising
background image

14

INSTALLATIONS INSTRUCTIONS

Before you begin

Read these instructions completely and carefully.

• IMPORTANT. Save these instructions for local

inspector’s use�

• IMPORTANT. Observe all governing codes and

ordinances�

• Note to Installer. Be sure to leave these instructions

with the Consumer�

• Note to Consumer. Keep these instructions for future

reference�

• Skill level. Installation of this appliance requires basic

mechanical skills�

• Completion time. Refrigerator installation 30

minutes� Water line installation 30 minutes�

• Proper installation is the responsibility of the installer�

• Product failure due to improper installation is not

covered under the warranty�

PREPARATION

Water supply to the ice maker

If the refrigerator has an ice maker, it will have to be

connected to a cold water line�

TOOLS YOU WILL NEED

MOVING THE REFRIGERATOR

1. Loading the refrigerator onto a hand truck.

Leave all tape and door pads on doors until the refrigerator

is in its final location� To move the refrigerator, use a

padded hand truck� Center the refrigerator on the hand

truck and secure the strap around the refrigerator� DO NOT

OVERTIGHTEN THE STRAP

2. Remove the base grille.

Remove the grille by removing the two phillips head screws�

If the refrigerator must go through any entrance

that is less than 38” wide, the doors must be

removed� Proceed to Step 3�

If all entrances are more than 38” wide, skip this

section�

3. Disconnect the water coupling (on some models)

If the refrigerator has a water dispenser, there is a water line

from the cabinet into the bottom hinge on the freezer door

that must be disconnected� To disconnect, push in on the

white collar of the coupling and pull out the tubing�

Advertising