Hawk Industries Spinner Manual 550 HYDRAULIC Serial Numbers 1 to 205 - Manual (Page 5)

5
Table of Contents (cont.)
Air Power Pack Maintenance (Continued)
Adjusting Grip Pressure............................................... 34
Air Regulator Maintenance................................................ 34
Hydraulic Oil Level............................................................ 35
Changing Oil Filter Cartridge............................................
35
Changing Suction Strainer................................................. 36
Repair Power Train........................................................... 37
Install Coupler Halves........................................................ 38
Trouble Shooting 39
Trouble Shooting Hydraulic Spinmaster..................................... 39
Actuate Any Valve and Nothing Happens......................... 39
Actuate the Motor Valve and Nothing Happens................ 39
Actuate the Door Valve and the Lever
Does'nt Stay Shifted........................................................... 39
Spinner Torque is Insufficient to Turn Pipe.......................
39
Spinner Slips...................................................................... 40
Spinner Thrusts Off the Pipe While Spinning ..................
41
Chain Wears Prematurely.................................................. 41
Main Relief Makes Noise and Hyd Fluid Heats Up..........
41
Spinner Runs Slower Than Normal................................... 42
All Other Rig Hydraulics Stop Working...........................
43
Trouble Shooting Air Spinmaster................................................ 44
Actuate Any Valve and Nothing Happens........................ 44
Actuate the Door Valve and Nothing Happens................. 44
Spinner Torque and Speed Insufficient............................. 45
Spinner Slips...................................................................... 46
Chain Wears Prematurely.................................................. 46
Spinner Thrusts Off the Pipe While Spinning...................
46
Spinner Chain Creeps When Spinner is Off...................... 47
Spinner Performance in Cold Wheather............................ 47
Drawings 48
550 Air Spinmaster ...................................................................... 48
550 Hydraulic Spinmaster ........................................................... 50
950 Air Spinmaster ...................................................................... 52
950 Hydraulic Spinmaster ........................................................... 54
Speed Reducer P/N 031-24625 ....................................................56
Hydraulic Motor P/N 031-*ME09 ..............................................58
Power Pack Air Motor P/N 031-P-16 ..........................................60
Table of Contents