Hawk Industries Spinner Manual 550 HYDRAULIC Serial Numbers 1 to 205 - Manual (Page 7)

7 Warranty
Warranty
STANDARD WARRANTY AND FIELD SERVICE
It is important to Hawk Industries to provide all Spinmaster users with the best tool possible along
with the highest degree of dependability and satisfaction. Because of this, we offer the following
warranty.
Your Spinmaster must be free of material and workmanship defects for a period of one year from
the date of delivery. If any items fail because of a manufacturing defect within that period of time,
that item will be replaced by the Hawk Company.
Replacement of parts will be accomplished either at the factory or at a designated service point.
This guarantee does not include the replacement of parts where failure occurred due to normal wear
and tear or misuse of the tool.
Hawk Industries will in no event be liable for consequential damages or contingent liabilities
arising out of the failure of any parts to operate properly.
No expressed, implied or statutory guarantee other than herein set forth is made or authorized to
be made by Hawk Industries.
Factory specifications for hydraulics, pneumatics, lubricants, adjustments and safety precautions
as set forth in the operation and maintenance manual are for the mutual protection of the owner of
the Spinmaster and the company. Failure to adhere to these specifications can reduce the efficiency
or life of the equipment and/or cause bodily injury.
CAUTION