Hawk Industries Spinner Manual 950 PNEUMATIC Serial Numbers 81 to 189 - Manual (Page 35)

35 Maintenance & Repair
HOC
HFE
1. Check oil level once per week.
2. Remove hydraulic oil cap (HOC)
located on the top of the hydrau-
lic tank. Oil should be main-
tained at a level no lower than
3" below the top of the tank,
and no higher than 1" from the
top of the tank.
3. If the level is too low, add #10
wt. foam suppressed hydraulic
oil.
1. The Hydraulic filter cartridge
should be changed once every
six (3) months of operation.
2. Unscrew the hydraulic filter car-
tridge (HFE) and replace.
Hydraulic Oil Level
Changing Oil Filter Cartridge
Part Name Part #
Filter Element (HFE) 031-P11-1
Part Numbers
Air Power Pack Maintenance