Rhin-O-Tuff HD4170 - Manual (Page 11)

10
Binding and Crimping;
See Illustration 6.0.
Binding is as simple as
with the HD-4170 Rhin-O-Roll. Form, Start Coil,
and Bind. Doc-U-Form Book forming and lower Roll position is covered in
Chapter 2. To bind, firmly grab the book from the Start Coil position (described in
Chapter 3) with both hands at each end of the book up near the binding edge.
Without shifting the form of your book, pick the book up and roll it into binding
position between the top on lower roller
. Gently push the started coils against
both top and lower roller. The top roller will grab the coil and spin it into your
book. It may not be necessary to use the Book Former
with smaller (5MM-
12MM) books. With practice, 50MM specialty binding can be done.