Rhin-O-Tuff HD4170 - Manual (Page 12)

11
See Illustration 6.1.
Once you have coiled your book crimping is made easy with the crimping pliers
provided. Orient your book with the coiled side toward you
as shown, then on
the right end of the book as shown, orient the pliers with the dot facing up.
Open the pliers and grasp them around the first coil that exits the book . While
keeping the pliers level with the book, snip the coil through. The pliers will finish
the coil with a “L” shaped end
facing the book. This helps the coil from
backing out of the book. Now you can flip the book over, keeping the coils toward
you and repeat this same crimping technique to complete the book. Or you can
keep the book stationary and flip the pliers over, move to the opposite end of the
book and crimp the last coil that exits the book to complete the book.
Your HD-4170 Rhin-O-Roll has an optional dual crimpier module that mounts on
top of the coiler.