Rhin-O-Tuff HD4170 User Manual
Page 9
8
Placing the HD-4170 in the proper location & Binding Styles;
Locate a clear work area with a outlet within 5 feet that provides a 15-amp
service (16-amp European) which is protected at the customer’s circuit box. The
work area must be a solid, firm cabinet or a heavy duty table with a flat level
surface. Power cord shall be certified for the country where the machine will be
installed.
Placing your HD-4170 Rhin-O-Roll Coiler in the proper location will also depend
on your binding technique. If your binding technique is to punch and stack the
entire job before coiling, then positioning the HD-4170 away from your punch for
more work area may be the best setup as well as leaving the HD-4170 on its
stand-alone feet as supplied. However if your technique is to punch and coil a
single book at one time and repeat until the job is complete then mounting the
HD-4170 Coiler directly onto your HD-6500, HD-7000, or HD-7700 punch may be
the best setup for you. Please see Chapter 5 for instructions to mount your HD-
4170 Coiler or skip to Chapter 6 for Binding.