Rhin-O-Tuff HD4170 User Manual
Page 8
7
Detailed Use of the HD-4170 Rhin-O-Roll;
¾ Doc-U-Form Book Former. See Illustration 3.0. The Doc-U-Form Book Former
shapes the binding end
of your book
so that insertion and starting of the
coil is simple to do. Gently jog your book onto the Book Former until formed.
Then start the coil into the first 5 holes or more by spinning it in by hand.
¾ Book Thickness Coil Selector and Roll Position Setting. See illustration 3.1
on next page. On top of the HD-4170 is the Book Thickness Coil Selector and
Roll Position Setting feature. It’s simple to use. You gently slide your book
from left to right into the Book Thickness Coil Selector slot. When you feel the
book slightly wedge into the slot stop sliding the book and read both the
recommended coil size selection number
(16MM shown) and the
recommended Roll Position Setting number
(position 2, middle position
shown). These are only recommendations and you may find other combinations
that suit your personal binding style. Other features available are the Coil Size
Indicator (O.D.)
and the paper Hole Pitch Gage
. With the Coil Size
Indicator
. Use the coil size indicator when the size of the coil is unknown.
Simply align the end / outside diameter (O.D.) to the indicator and read your coil
size. Use the Hole Pitch Gage in the same manor to determine what pitch the
paper has been punched with.