Myron L TH1 - Manual (Page 20)

16
A. Memory Storage
1. While displaying a measurement, press to record the
displayed value.
2. “MEMORy” will appear and the
temperature display will be
momentarily replaced by a
number (1-20) showing the
position of the record. Figure
6 shows a reading of 1806 µS
stored in memory record #4.
B. Memory Recall
1. Press any measurement key.
2. Press , “MEMORy” will appear, and the display will show
the last record stored.
3. Press or to scroll to the record location desired
(the temperature display alternates between temperature
recorded and location number).
4. Press any measurement key to leave memory recall or allow to
automatically turn off.
C. Clearing a Record/Memory Clear
After recalling a certain record location, press to clear that
memory. This space will be the place for the next memory record, unless
you scroll to another empty position before ending the recall sequence.
The next memory stored will go into the next highest available memory
location.
Example: You have locations 1-7 filled, and wish to clear the conductivity
reading stored in record location #3 and replace it with a pH reading.
1. Press and scroll to location #3.
2. Press to clear old record #3.
Figure 6
° C
KCl
COND
MEMORY