j5 create JUC700 USB 3.0 Wormhole Switch DSS - Windows - Manual (Page 12)

WORMHOLE SWITCH JUC700 USER MANUAL
12
Driver installation: Windows XP
Device Driver Installation
This section illustrates the procedure for the installation of the device driver on Windows XP. To
start, insert the Driver CD into your computer’s CD-ROM drive. The setup program should be
launched automatically. If Autorun does not begin, go to Computer, click on your CD drive, and
manually run the setup CD by double-clicking on Setup.exe
※Please make sure the USB cable of USB 3.0 WORMHOLE SWITCH JUC700 is unplugged from
your PC or Notebook before executing the installation program.
1. The installation page will be launched. To start click on Install the Latest Driver (Please make
sure your computer is connected to the internet or press Install Driver to start the
installation).