j5 create JUC700 USB 3.0 Wormhole Switch DSS - Windows - Manual (Page 17)

WORMHOLE SWITCH JUC700 USER MANUAL
17
II. Device connection
After the computer is rebooted, connect either end of the WORMHOLE SWITCH
JUC700 into a USB 3.0 port on one of the two computers. And connect the other end
of the WORMHOLE SWITCH JUC700 into the second computer.
(The computer might take some time to recognize the JUC700 the 1 st time it is plugged
in)
Tips: Verify Device Driver Installation and Hardware connections
The following procedure helps you to verify the success of WORMHOLE SWITCH JUC700 driver
installation after connecting it to both computers.
Right-click My Computer  Manage  Device Manager click + sign of Universal Serial Bus
controllers, the device name for the WORMHOLE SWITCH JUC700 will be shown on the list.