j5 create JUH450 USB 3.0 HDMI & 3-Port HUB - Manual (Page 8)

USB 3.0 MULTI-ADAPTER
USER MANUAL
7
drive, and manually run the setup CD. Double Click on Setup.exe to start.
※
Make sure the USB cable is unplugged from your PC or Notebook before executing the
installation program.
1. The installation page will be launched. To
start click on Install the Latest Driver. Please
make sure you are connected to the internet
or press Install Driver to start the installation. 2. After pressing the installation option, the
InstallShield Wizard will launch, click Next
to continue.
3. Read the license agreement, check I
accept the terms of the license agreement,
click Next >
4. When the Install Shield Wizard is complete,
select Yes, I want to restart my computer
now. Click Finish to restart.
5. After restarting your computer connect the
USB 3.0 MULTI-ADAPTER USB cable to your
PC or Notebook. The Installing device
driver software message will pop-up.
6. Windows 7:
When the driver software has been
installed successfully the message to the
right will appear on your computer.
Windows XP: An icon ( ) will be seen
on the lower right toolbar. Your driver
software was installed successfully when
the message to the right is shown.
The display functions of the USB3.0 Multi-Adapter will be activated after the computer has
been restarted. You might see the mirror display shown on the display device.