Alpine ERA-G311 - Manual (Page 10)

10
English
Equalizer/Surround
Operation
1
Creating a Custom BBE
Curve
Press the BBE button to select a BBE mode to
be adjusted. The BBE indicator will blink for 5
seconds.
While the BBE indicator is blinking, press the
EQ Band up/down (
r / l ) buttons to select
either the high or low frequency bands to be
adjusted.
Adjust for desired levels by pressing the level
UP/DN (
< / > ) adjusting buttons while the
indicator is blinking.
Adjustments can be made to the other BBE
modes by repeating the above procedures for
each one you wish to customize.
BBE 1
2
3
Example: BBE 1
BBE