Alpine ERA-G311 - Manual (Page 8)

8
English
Equalizer/Surround
Operation
1
EQ FLAT
Adjusting the Equalizer
Settings
You can modify the Equalizer settings to create
a response curve more appealing to your
personal taste.
Press the EQ (EQUALIZER) button repeatedly
to select the Equalizer setting preset which you
wish to adjust. The EQ indicator blinks for 5
seconds.
The example shows FLAT mode.
Dual mode
While the EQ indicator is blinking, press the
DISP button. The EQ mode will toggle between
front or rear.
While the EQ indicator is blinking, press the EQ
BAND DN (
l ) or UP ( r ) button to select the
frequency band to adjust. The BAND indicator
of the selected frequency will blink.
Press the LEVEL DN ( > ) or LEVEL UP ( < )
button while the frequency range is blinking to
decrease or increase the level respectively.
Repeat Steps
2 and 3 to adjust other
frequency ranges.
To adjust other Equalizer settings, repeat Steps
1 to 3 .
3
F
R
2
- - - - - -
EQ
DISP