Alpine ERA-G311 - Manual (Page 24)

24
English
Remote Control
Operation
The remote control operations (RUE-4185/
RUE-4160/RUE-4162) described in the
following sections are applicable to full Ai-NET
compatible units only (TDA-7558, etc.).
Notes:
•
The following display examples appear in
the Alpine Ai-compatible head unit displays.
• These displays will differ depending upon
the Alpine head unit connected.
Customizing the Equalizer
Settings
Select the equalizer characteristic to be
adjusted. Refer to page 18 "Selecting the
Factory Preset Equalizer Settings".
Press the ENT button to enter the frequency
adjustment mode. The first frequency band will
be displayed for 5 seconds.
While in the frequency adjustment mode, press
the
c or f button to display the frequency to
be adjusted.
Changes to the frequency band selected must
be made within 5 seconds, otherwise the unit
will return to normal mode.
While the frequency is still displayed, press the
8 or 9 button to adjust for the desired level.
If you want to adjust more, repeat the steps
above.
Note: In the dual mode, press the BAND/PROG
button to switch Front/Rear.
1
2
50 0
ENT
3
2.0K 0
ENT
2.0K +6
4
ENT
RUE-4160
RUE-4160
RUE-4160