Remote control operation, Initial turn-on after installation – Alpine ERA-G311 User Manual

Page 34

Advertising
background image

34

English

Remote Control
Operation

If you encounter a problem, please review the
items in the following checklist. This guide will
help you isolate the problem if the unit is at
fault. Otherwise, make sure the rest of your
system is properly connected or consult your
authorized Alpine dealer.

Symptom

No function or display.

Cause and Solution

Car's ignition is off.
– If connected following instructions, the

unit will not operate with the car's ignition
off.

Improper power lead connections.
– Check power lead connections.

Blown fuse.
– Check the fuses on the battery leads;

replace with the proper value if neces-
sary.

English

In Case of
Difficulty

Initial Turn-On After Installation

Advertising