Equalizer/surround operation – Alpine ERA-G311 User Manual
Page 15
15
English
Equalizer/Surround
Operation
Memorizing the
Equalizer Settings
Press the EQ button to select the desired
equalizer setting (factory preset or your own)
you wish to store in memory.
Press and hold any one of the Memory buttons
for at least 2 seconds. The Preset indicators
blink for 5 seconds showing the unit is ready for
storing.
Press the Memory button into which you wish to
store the selected equalization setting while the
Preset indicators are blinking. Repeat Steps
1
to
3
to store other settings.
The example shows the setting has been stored
at the Preset 1.
Notes:
•
If the band quantity is switched, the
memory contents will be cleared.
•
You can store the BBE and Surround
settings as well as the Equalizer settings in
the Presets.
•
To recall the curve memorized, press one of
the memory buttons you memorized.
2
1
3
PE
P1
1
@.#
EQ
2
1
3
4
5
6
2
1
3
4
5
6