Akai PDP4273M - Manual (Page 14)

13
Insertion of Batteries:
- Turn the remote control upside down, press and slide off the battery cover.
- Insert two 1.5V (AAA) batteries into the compartment, take care to observe the and
markings indicated inside.
- Replace the cover and slide in reverse until the lock snaps.
13 Auto: The Display automatically adjusts the
phase, vertical / horizontal position when
pressing this button in VGA mode.
14 Menu: Press this button to pop up the OSD
Menu and press it again to exit the OSD Menu.
15 V-Chip: Press this button to enter the V-Chip
Function. (Only for AV or S-Video)
16 P. Still: Press this button to hold on the
screen. Press again to normal.
17 C/C: Press this button to enter the Closed
Caption Function. (Only for AV or S-Video)
18 Display: Press the button to display the
source information.
19 Sound: Press the button to select different
sound effect.
20 Time: Press this button to pop up the “Clock
Set” menu.
21 P. Size: When the input source is YPbPr 1,
YPbPr 2, VGA or HDMI, press this button,
the picture will change according to Fill All,
Force 4:3, Letter Box, Wide or Anamorphic.
When the input source is AV or S-Video, press
this button, the picture will change according to
Fill All, 4:3, Letter Box, Wide or Anamorphic.
22 PIP Size : Press the button to select different
Image Size in PIP Mode.
23 P. Mode : Press the button to select different
picture effect.
24 F. White: Press this button to show a full
white picture.
25 Sleep: Press this button to select the sleep
time.