Akai PDP4273M - Manual (Page 29)

28
☼ V-Chip Enable
- Press ▲ or ▼ button to select “V-Chip Enable” in Sub Menu, then press ◄ / ►
button to select “On” or “Off”.
- “Movie Block” and “TV Block”, these functions are activate, while “V-Chip” select
“On”.
- “Movie Block” and “TV Block”, these functions are inactivate, while “V-Chip” select
“Off”.
- Press Menu button to exit Sub Menu or Main Menu.
☼ Movie Block
- Press ▲ or ▼ button to select “Movie Block” in Sub Menu, then press OK or ►
button to pop up “ Movie Content Blocking” Menu.
- Press ▲ or ▼ button to select “G”, “PG”, “PG 13”, etc.
- Press OK button to lock (display “ ”) or unlock (doesn’t display “ ”).
- When display “ ”, you can not watch the programs.
- When doesn’t display “ ”, you can watch the programs.
- Press Menu button to exit Sub Menu or Main Menu.
(Continued on next page)
Note: The initial password for the system is 0000.
Please operate “Change” at the first time.
If you had forgotten the password, please contact with service centre.
☼ Change Blocking Password
- Press ▲ or ▼ button to select “Change” in Sub Menu, then press OK or ► button
to pop up “Enter New Password”.
- Use 0~9 buttons to enter your new password.
- Press OK button to confirm and pop up “Confirm Password”.
- Use 0~9 buttons to enter your new password again.
- Press OK button to confirm.
- Press Menu button to exit Sub Menu or Main Menu.
Enter New Password
- - - - OK
Confirm Password
- - - - OK