Akai PDP4273M - Manual (Page 20)

19
Swap:
- Press this button on remote control to switch the Main
window or Sub window picture in PIP or Split Screen.
S. Sele:
- Press this button to select the sound output from Main
Window or Sub Window.
W. Sele:
- Press this button to select the Main Window or Sub Window.
- When you want to select the signal source from the Main
Window or Sub Window, you can press Source button to
pop up “Source Select” menu, then use ▲ or ▼ button to
select the signal source and press OK or ► to confirm.
Display:
- Press this button to show the source’s information as follow:
6.3 Other Function
AV
Mode
VGA
Mode
PIP
Mode
Split Screen
Mode
F. White:
- Press this button to show a full white picture, press it again to return to the normal
picture.
Note: Some data will be update in five seconds if you change them.
PIP Size:
- Press this button to pop up the “PIP Size.” item, then press ◄ / ► button to select
different PIP Size in PIP Mode.
Auto:
- Press this button to adjust the phase, vertical / horizontal position in VGA Mode only.
PIP POS.:
- Press this button to pop up the “PIP Position” item, then press ◄ / ► button to select
different PIP position in PIP Mode.
01 : 01 AM
Main：VGA
700x566/50Hz
Sub：AV
NTSC 60Hz/3.58MHz
01 : 01 AM
Fill All
VGA
700x566/50Hz
01 : 01 AM
Fill All
AV
NTSC 60Hz/3.58MHz
01 : 01 AM
Main: VGA
700x566/50Hz
Sub: AV
NTSC 60Hz/3.58MHz