Akai PDP4273M - Manual (Page 23)

22
2 Window Page
[Input source is YPbPr 1, YPbPr 2, VGA or HDMI signal]
- Press Menu button, then press ◄ or ► button to choose the “Window” item.
- Press ▲ or ▼ button to select “Image Size”, “H Position”, “V Position”, “H Resolution”
or “Freeze Window”, then press OK or ► button to enter.
- Press ◄ or ► button to adjust;
- Press Menu button to exit Sub Menu or Main Menu.
Note: 1. When the signal source is HDMI, you can’t adjust “H Resolution”.
2. In VGA,YPbPr 1 or YPbPr 2 signal source, when select “Fill All” in “Image Size”
item, you can adjust “H Resolution”.
Hot keys:
- Press P. Mode button to pop up the menu, then press ◄/► or P. Mode button to select
Normal, Bright, Cinema or User.
Items (press ▲/▼ button) Adjust (press ◄/► button) Adjust Effects
Image Size Choose
Choose Fill All, Force 4:3, Letter
Box, Wide or Anamorphic
H Position Decrease / Increase Picture Left / Right Move
V Position Decrease / Increase Picture Down / Up Move
H Resolution Decrease / Increase Picture Left and Right Shrink / Broaden
Freeze Window Choose Choose Off or On