Akai PDP4273M - Manual (Page 27)

26
[Input Source is AV or S-Video]
● You can set “CC (Close Caption)” as the following operation:
- Press Menu button, then press ◄ or ► button to choose the “Options” item.
- Press ▲ or ▼ button to select “Close Caption Mode” or “Close Caption”, then press
OK or ► button to enter.
- Press ◄ or ► button to adjust;
- Press Menu button to exit Sub Menu or Main Menu.
(Continued on next page)
Hot keys:
- Press Time button to show the Timer menu, then you can set “Clock Set, Timer, Wake
Up Time or Sleep Time”. The operation is as same as above.
Sleep Time function
- Press Sleep button to select “15 Minutes, 30 Minutes, 45 Minutes, 60 Minutes, 75
Minutes, 90 Minutes, 105 Minutes, 120 Minutes or Off”.
Note: With these functions, the PDP will be turned on or off at the set time automatically.
1. Before you use these functions, please set the time of “Clock Set” to the current time.
The Wake Up Time and Sleep Time base on the Clock Set you set.
2. Turn off the PDP by Power Switch will cancel the “Clock Set, Timer, Wake Up Time or
Sleep Time” settings.
3. Turn off the PDP by Power Switch or set “Off” by Sleep button will cancel the
“Sleep Time” settings.
- When you select “Timer”, press OK or ► button to enter.
- Press ◄ or ► button to move the bit, press ▲ or ▼ button to adjust.
You can set the timer three ways:
a. Set the “Wake Up Time” only
b. Set the “Sleep Time” only
c. Set the “Sleep Time” and “Wake Up Time”
Note: 1. After you set the timer, you must press Standby button to put the PDP in
the standby mode.
2. The setting is valid, you must set “On” in “Timer”.