Bell & Gossett P5002169C Series VSCS - Manual (Page 26)

24
Figure 20: Installation/Removal Coupling Guard
BRACKET GUARDS
WARNING: Extreme Temperature
Hazard
If pump, motor, or piping are operating at
extremely high or low temperatures, guarding or
insulation is required.
Failure to follow these instructions could result in
serious personal injury or death, or property
damage.
Guarding is also provided to give protection for the
exposed shaft length between the seal gland/stuff
box and the bearing housing. (See Figure 21.)
Three guards are provided for each bracket: two
for the side windows and one for the top window.
Figure 21: Bracket Guard Installed on Inboard
Bearing Bracket