Communicating with the r325p, Usb485 converter card – RMS Technologies R325P DRIVER User Manual
Page 12
Advertising
Communicating with the R325P
1. Connect P1 to PC via RS485-232 Converter Card or USB485 Converter Card.
2. Set up HyperTerminal by selecting correct COM port
3. Settings for HyperTerminal is as follows: 57600, 8 bits, None, 1, None
4. The R325P Driver only version allows for changing the hold timeout settings, the
amount of mixed decay, and to check the firmware revision level.
RS485-232 Converter Card
Image 7.1
USB485 Converter Card
Image 7.2
R325P User Manual
Page 12 of 20
5/29/2013 Version 1.01
Advertising