Atari 040-0050-01 User Manual
Page 25
Section 2 – Cabinet Conversion
© 2004 GLOBAL VR
®
, INC.
040-0050-01
Rev. A 10/29/2004
Page 25 of 48
6. If your cabinet has existing tournament rules artwork located between the speakers and
just above the monitor, remove the screws around the metal plate that holds both the
artwork and the speakers to the cabinet, as shown by the arrows in the picture below.
7. Remove the metal plate and replace the old artwork with the new gvrSX™ game
graphics.
Apply the Serial Number Sticker
Place the serial number sticker from the kit on the outside of the cabinet in the upper left-
hand corner, as shown by the arrow in the picture below.
This completes the cabinet conversion. Proceed to the next section to verify proper operation
and calibrate the joystick.