Atari 040-0050-01 - Manual (Page 4)

Preface
gvrSX™ Conversion System Manual
Page 4 of 48
040-0050-01
Rev. A 10/29/2004
FCC Notices (United States)
Electromagnetic Interference (EMI) is any signal or emission radiated in free space or
conducted along power or signal leads, that endangers the functioning of radio navigation or
other safety service, or that seriously degrades, obstructs, or repeatedly interrupts a licensed
radio communications service. Radio communications services include, but are not limited
to, AM/FM commercial broadcast, television, cellular services, radar, air-traffic control,
pager, and Personal Communication Services (PCS). These licensed services, along with
unintentional radiators such as digital devices (including computer systems) contribute to the
electromagnetic environment.
Electromagnetic Compatibility (EMC) is the ability of items of electronic equipment to
function properly together in the electronic environment. While this computer system has
been designed and determined to be compliant with regulatory agency limits for EMI, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference with radio communications services, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one
or more of the following measures:
• Re-orient the receiving antenna.
• Relocate the cabinet relative to the receiver.
• Plug the game into a different outlet so that the computer and the receiver are on different
branch circuits.
If necessary, consult a Regulatory EMC representative of GLOBAL VR
®
or an experienced
radio/television technician for additional suggestions. You may find the FCC Interference
Handbook, to be helpful. It is available from the U.S. Government Print Office, Washington,
DC 20402.
This device has been tested and complies with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instruction manual, it may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own
expense.
Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.