Atari 040-0050-01 - Manual (Page 33)

Section 4 – Using the Game Operator Menu
© 2004 GLOBAL VR
®
, INC.
040-0050-01
Rev. A 10/29/2004
Page 33 of 48
Game Selection
The Game Selection window allows you to disable installed games so that they are not
available to play in the multi-game selection window. Select a title and press the Trigger
Button to put an “X” next to the game that you want disabled. When you exit the Operator
Menu, the game will be unavailable for play in the Multi-Game Selection. The game is not
deleted, and can be re-enabled at any time by removing the “X” in the Game Selection Menu.
If you have installed a game and it does not appear in the Multi-Game Selection window
during Attract Mode, or in the Game Selection Menu, check to make sure the Game Dongle
is inserted correctly. When a USB Game Dongle is inserted correctly and recognized by the
Game Software, it should light up with a red LED.
Player Control Test
The Player Control Test will validate that the controls are set up correctly and working
properly. When you press a button, a red arrow will appear on the test screen to indicate
which button was pressed, as shown in the picture above. When you move the Joystick in