Atari 040-0050-01 - Manual (Page 37)

Section 5 – Starting a Game
© 2004 GLOBAL VR
®
, INC.
040-0050-01
Rev. A 10/29/2004
Page 37 of 48
USB Game Dongles
The three Beach Head games supplied with the cabinet use one USB game dongle. The
dongle must be inserted in the USB port or the game will not work. When the USB Dongle
is installed and working properly, a red LED will illuminate inside the dongle.
For a USB Game Dongle to be recognized correctly, it must be inserted into the USB port
before the cabinet is powered ON. If the software does not recognize the USB Dongle,
power the cabinet OFF and then ON to see if this resolves the problem.
If more game titles are made available for the gvrSX™ system in the future, each game will
come with a USB Game Dongle. If more than one dongle is required, a USB hub can be
used to provide extra USB Ports for multiple game dongles.
Important: If you use a USB hub, do not connect the USB cable from the HAPP UGCI
Controller card to the USB hub. The card will not work properly if connected to the hub.